Item Description
One particular of the essential parts sits on the Motor Flywheel and engages with the pinion of the starter motor to crank the engine upon Starting. Ring gear transfers beginning torque from starter to motor crankshaft. Ring gears have a diversified sector presence and are typically utilized in passenger cars, trucks, tractors, earth moving gear, maritime engines, garden mowers, and industrial/power era.
| Specs | |
| Shape | Ring Gear |
| Tooth Profile | involute |
| Description | Transmission Ring Gear |
| Size | In accordance to Drawing |
Complex Depth
|
Picked Materials |
Carbon Steel | SAE1020, SAE1045, Cr12, 40Cr, Y15Pb, 1214L etc |
| Alloy Steel | 20CrMnTi, 16MnCr5, 20CrMnMo, 41CrMo, 17CrNiMo5 and so forth | |
| Brass/Bronze | HPb59-1, H70, CuZn39Pb2, CuZn40Pb2, C38000, CuZn40 and so on | |
|
Modules |
1., 1.25, 1.5, 1.75, 2., 2.twenty five, 2.5….8. and so on | |
|
Machining Method |
Gear Hobbing, Equipment Milling, Equipment Shaping, Equipment Broaching, Gear Shaving, Gear Grinding, and Equipment Lapping |
|
|
Tolerance Handle |
Outer Diameter | ±0.005 mm |
| Length Dimension | ±0.05 mm | |
|
Warmth Remedy |
Quenching & Tempering, Carburizing & Quenching, Higher-frequency Hardening, Carbonitriding…… | |
|
Teeth Accuracy |
DIN Course 4, ISO/GB Course 4, AGMA Class 13, JIS Course | |
|
Surface area Treatment method |
Blacking, Polishing, Anodization, Chrome Plating, Zinc Plating, Nickel Plating…… |
 
| Gear Basic Info | |
|---|---|
| Gear Tooth Condition | involute |
| Equipment Content | 42CrMo |
| Equipment Process | fogging, long lasting, tooth milling, internal and plane grinding, tooth grinding |
| Force Angle | 20° |
| Quality degree | DIN 3962 class 7 |
| Equipment Sort | Mn=6, Z=109, β=0°, X=-.25 |
Capabilities OF Equipment/ SPLINE
| INTERNAL GEARS AND Inside SPLINES | |||
|---|---|---|---|
| MILLING | SHAPING | TOOTH GRINDING | |
| Highest O.D. | 2500 mm | 2500 mm | 2500 mm |
| Minimum I.D. | 650 mm | 50 mm | one hundred mm |
| Maximum Experience Width | 500 mm | five hundred mm | five hundred mm |
| Greatest Diametral Pitch | D.P. one | D.P. 1 | DP .five |
| Highest Module | 26 mm | 26 mm | 45 mm |
| AGMA Level/ DIN Level | DIN Class eight | DIN Class 8 | DIN Course 4 |
| Tooth Surface area Finishing | Ra 3.two | Ra 3.2 | Ra .6 |
| Maximum Helix Angle | ±22.5° | ±22.5° | ±45° |
| EXTERNAL GEARS AND Exterior SPLINES | |||
| HOBBING | MILLING | TOOTH GRINDING | |
| Greatest O.D. | 1250 mm | 2500 mm | 2500 mm |
| Minimal O.D. | twenty mm | two hundred mm | twenty mm |
| Highest Face Width | five hundred mm | five hundred mm | 1480 mm |
| Greatest Diametral Pitch | D.P. 1 | D.P. one | DP .5 |
| Greatest Module | 26 mm | 26 mm | forty five mm |
| AGMA Level/ DIN Stage | DIN Class eight | DIN Course eight | DIN Class four |
| Tooth Area Ending | Ra 3.2 | Ra 3.2 | Ra .6 |
| Greatest Helix Angle | ±45° | ±45° | ±45° |
FAQ
Q: Are you a investing firm or a company?
A: We are a manufacturing facility.
Q: How extended is your delivery time?
A: Normally, it is 5-10 days if the items are in stock. Or it is fifteen-twenty days if the merchandise are not in stock, according to quantity.
Q: Do you offer samples? Is it free of charge or added?
A: Yes, we could supply the sample for free but do not pay out the freight cost.
Q: What are your phrases of payment?
A: Payment<=1000USD, a hundred% in progress. Payment>=1000USD, 30% T/T in progress ,equilibrium prior to shippment.
If you have another concern, please make contact with us as beneath.